Separates milled PCBs carefully and fast
Hektor separates milled PCBs carefully and fast. The offcut material is removed smoothly and precisely. The matrix consists of two parts. This ensures easy and cost-saving change of the blades. Compressed air is used for the separation process.
The operating pressure can be set on the machine. When the foot switch is pressed, the off-cut is punched out. The off-cuts are collected in the collecting box. When the gate is opened the waste material can be extracted.
Safe operation with Off-Cut Remover Hektor 2
The PCB is slipped with its milled groove over the blade and is placed onto the matrix. The off-cut is pulled under the blade. When the foot switch is pressed, the off-cut is punched out and the waste material is collected inside the machine.
||max. 2.5 mm
||typical 4 bar
Temperature / Humidity Operation
Temperatur / Luftfeuchte Storage
Temperatur / Luftfeuchte Transport
| +5 - 40° C / 10 - 85 % not condensing
+0 - 60° C / 20 - 80 % not condensing
-25 - 60° C / 20 - 80 % not condensing
|Dimensions H x W x D
||170 x 220 x 255 mm
||CE, FCC class A