When large numbers of pre-scored PCBs need to be separated
MAESTRO 5L with base frame is used most economically whenever large numbers of pre-scored PCBs need to be separated. The well-arranged control panel ensures easy operation.
Machine with base frame - adjustable in height for optimal modification of each application.
PCB panels with maximum width of 310 mm can be separated by up to 11 pairs of circular blades simultaneously. Configuration of the blades is adjusted to your individual PCB also the cover and the guide.
Sensors are used to monitor the separating process. The PCBs are placed either by hand or they feed automatically by a loading station. The machine can also be installed in an assembling line. The SMEMA interface is the standard connection for use.
New: every machine is automatically prepared for dust extraction and with cleaning brushes for rear-end conveyor.
PCB panels wider than 310 mm machine on request.
||Component side: circular blade
Solder side: circular blade
||100 - 220 mm/s in 10 steps
|Length of PCB panel
||with light barrier activated: 100 - 570 mm
with light barrier de-activated: > 2000 mm
|Width of PCB panels
||max. 310 mm
||min. 3 mm
|Height of components
||Component side: max. 30 mm
Solder side: max. 10 mm
|Number of circular blades
||max. 11 on each shaft
|Width of PCBs
||10 - 300 mm
Separated lenght or numbers of PCB panels
||Start, stop, reverse
Setting of separated speed
||Detection of separation lenght
Accumulation in front of and behind the blades
Stop the end of the conveyor belt
SMEMA (round 14 pins)
||240 VAC 50 Hz
110 VAC 60 Hz
|Temperature / Humidity Operation
Temperatur / Luftfeuchte Storage
Temperatur / Luftfeuchte Transport
| +5 - 40° C / 10 - 85 % non-condensing
+0 - 60° C / 20 - 80 % non-condensing
-25 - 60° C / 20 - 80 % non-condensing
Maß e Width
Maß e Depth
|750 - 1000 mm
||CE, FCC class A